You are here: Home

network

Hardware Information

OLED Display Blau I2c 128x64 0.96’’

Created: 05 December 2020 | Written by Super User | Print | Email | Hits: 3251

OLED Display Blau I2c 128x64 0.96’’

4 Pin OLED Display (COG+PCB) 0.96", 128x64

Model No. WEA012864D-03

►Type: Graphic
►Structure: COG+PCB
►Size: 0.96"
►128 x 64 Dot Matrix
►Built-in controller SSD1306
►3V/5V Power supply
►1/64 duty
►Interface: I2C
►4 Pin OLED Display
►Display Color: White / Yellow / Blue

DESCRIPTION

WEA012864D-03 version 4 pin OLED display module is a diagonal size 0.96 inch COG OLED display with PCB board on it. This WEA012864D-03 version OLED display is made of 128x64 pixels. WEA012864D-03 module is built in with SSD1306BZ IC, it communicates via I2C interface only, VCC 3V /5V, I/O level 5V to 3V, with conversion circuit, 1/64 duty cycle. The WEA012864D-03 model is having a smaller PCB than WEA012864D-01 version of which outline size is 27.3x27.3x2.37mm with mounting holes on board and 4 metal pins on module.

This 0.96 inch OLED module is suitable for smart control, industrial control, smart home application, medical device, etc. WEA012864D-03 module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.

SPECIFICATIONS

Interface Pin Function

No.	Symbol	Function
1	VCC	Power supply input: 2.8 – 5.2V
2	GND	Ground
3	SCL	The serial clock input.
4	SDA	The serial data input/output.

Mechanical Data

Item	Dimension	Unit
Dot Matrix	128 × 64	Dots
Module dimension	27.30 × 27.30 × 2.37	mm
Active Area	21.74 × 10.86	mm
Pixel Size	0.148 × 0.148	mm
Pixel Pitch	0.17 × 0.17	mm
Display Mode	Passive Matrix
Display Color	Monochrome
Drive Duty	1/64 Duty
IC	SSD1306
Interface	I2C
Size	0.96 inch

Absolute Maximum Ratings

Parameter	Symbol	Min	Max	Unit
Supply Voltage for Logic	VCC	1.65	5.5	V
Operating Temperature	TOP	-40	+80	°C
Storage Temperature	TSTG	-40	+85	°C

Electronical Characteristics

Item	Symbol	Condition	Min	Typ	Max	Unit
Supply Voltage for Logic	VCC	－	2.8	3.3	5.2	V
Input High Volt.	VIH	－	0.8×VCC	－	VCC	V
Input Low Volt.	VIL	－	0	－	0.2×VCC	V
Output High Volt.	VOH	－	0.9×VCC	－	VCC	V
Output Low Volt.	VOL	－	0	－	0.1×VCC	V
50% Check Board operating Current	ICC	Vcc=3.3V	－	12.0	20.0	mA

Search keyword: 128x64 oled, oled 128x64, 0.96 oled, 0.96" oled, 0.96 inch oled, oled 0.96, oled 0.96"

Source/Quellen:
- https://www.winstar.com.tw/products/oled-module/graphic-oled-display/4-pin-oled.html
-
-
-
-

Add a comment

Category: Raspberry Pi | shield - HATs - Erweiterungen

HIFIBERRY AMP2

Created: 04 December 2020 | Written by Super User | Print | Email | Hits: 3241

HIFIBERRY AMP2

Add a comment

Category: Raspberry Pi | shield - HATs - Erweiterungen

Phoscon deConz - Raspbee II, ZigBee-Aufsatzmodul für Raspberry Pi

Created: 30 November 2020 | Written by Super User | Print | Email | Hits: 6971

Phoscon deConz - Raspbee II, ZigBee-Aufsatzmodul für Raspberry Pi Add a comment

Category: Raspberry Pi | shield - HATs - Erweiterungen

HiFiBerry DAC+ Pro

Created: 31 October 2019 | Written by Super User | Print | Email | Hits: 5545

HiFiBerry DAC+ Pro

Full specs

The HiFiBerry DAC/DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi. It’s available for every Raspberry Pi Model—just pick the right board that matches the motherboard you want to use.

Directly powered from the Raspberry Pi—no additional power supply
Ultra-low-noise voltage regulator for optimal audio performance
Available with different output connectors: RCA or 3.5mm phone jack (DAC+ Light and Pro only available with RCA jacks)

For HiFiBerry DAC/ DAC+ standard and DAC+ pro:

Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality (ESS instead of Burr-Brown on DAC+ Light)
Hardware volume control—you can control the output volume using “alsamixer” or any application that supports ALSA mixer controls (not available on DAC+ Light)

For HiFiBerry DAC+ light/ DAC+ standard and DAC+ pro:

Connects directly to the Raspberry Pi—no additional cables needed
Comes as a pre-fabricated kit mounted in less than a minute—you just plug it onto the Raspberry Pi B+ (no soldering necessary)
Compatible with all Raspberry Pi’s with the 40-pin connector (Raspberry Pi B+/2/3/Zero)
Integrated EEPROM for automatic configuration (not DAC+ Light)
The board conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification.
Comes with all components required to mount it—the spacers are included when you buy the board

DAC+ Pro advanced features:

Gold-plated connectors: Gold-plated RCA connectors ensure optimal connection to your RCA cables.
Dual-domain clock circuit: The DAC+ Pro uses its own on-board low-jitter clock generator. To have the lowest jitter values, there are 2 different clocks on board: one for 44.1/88.2/176.4 kHz sample rates and another for 48/96/192kHz.
Hackable: The board can be modified to allow external power supply for the analog part of the board. Also you can connect external I2S DACs. These features need soldering on the board. This will void warranty, but real hardware hackers have no problems with this.

Quellen/Source:
- hifiberry | dacplus
-
-
-
-
- Add a comment

Category: Raspberry Pi | shield - HATs - Erweiterungen

StromPi v2

Created: 15 June 2019 | Written by Super User | Print | Email | Hits: 5061

StromPi v2 Add a comment

Category: Raspberry Pi | shield - HATs - Erweiterungen

Subcategories

Router Article Count: 19

Switch Article Count: 1

NAS / SAN Article Count: 4

Gadgets Article Count: 33

Gadget (englisch für Apparat, technische Spielerei oder auch Schnickschnack) bezeichnet ein technisches Werkzeug oder Gerät mit bisher so nicht bekannter Funktionalität und/oder besonderem Design. Es ist traditionellerweise klein und handlich und zum Mitführen konzipiert. Eine große Rolle spielt der Spaßfaktor eines Gadgets: Geräte, die sich als Gadget definieren, sind oft Grenzgänger zwischen sinnvoller Funktionalität und Verspieltheit.Der Duden definiert Gadget als „kleiner, raffinierter technischer Gegenstand“.