UPS infos via Rasperry Pi im Netz propagieren und Server oder NAS zum Download animieren.
Hardware
- Raspberry Pi, Model B+ PLUS - 512MB RAM
- APC Power Saving Back-UPS Pro 900
Software one the Raspberry Pi
- Debian
- Munin Node - APC UPS Pro 900
-
Configs to do on
Raspberry Pi | Server | FreeNAS 10 | |
Raspberry Pi | RASPBIAN LITE Minimal image based on Debian (follow the Pi Instruciton to install) | ? | ? |
on the Card add a empty file called SSH on the root |
|||
VI |
# sudo -i |
||
Fix IP address | # sudo vi /etc/dhcpcd.conf ? 40 # Example static IP configuration: 41 interface eth0 42 static ip_address=192.168.0.15/24 44 static routers=192.168.0.1 45 static domain_name_servers=8.8.8.8 |
||
|
|||
Set Time | # dpkg-reconfigure tzdata | ||
Script for smart update | |||
Apache 2 | # apt -y install apache2 | ||
Fail2Ban |
# apt install fail2ban -y |
||
[ssh] enabled = true port = ssh filter = sshd logpath = /var/log/auth.log bantime = 900 banaction = iptables-allports findtime = 900 maxretry = 3 |
|||
# service fail2ban restart | |||
check # iptables -L -n --line |
|||
NUT | # apt install -y nut nut-monitor nut-cgi nut-ipmi nut-snmp nut-xml | ||
# lsusb Bus 001 Device 004: ID 051d:0002 American Power Conversion Uninterruptible Power Supply |
|||
# vi /etc/nut/nut.conf MODE=netserver |
|||
# vi /etc/nut/ups.conf (around line 121) [apc900] driver = usbhid-ups # Treiber der verwendet werden soll port = auto desc = "APC 900 Smart-UPS" # Beschreibung der USV # maxretry = 3 |
|||
# systemctl reload nut-server | |||
# systemctl status nut-server | |||
# apt install wakeonlan arp command to find the MAC address |
|||
# upsc APC900 | grep battery.runtime: | awk '{print $2/60}' OFMT="%3.1f" |
Quellen/Source:
- Raspberry FORUM: UPS Information to LAN
- https://www.tobias-baeumer.de/apc-usv-proxmox/
- networkupstools.org
- servernetworktech.com/2013/06/upsalert-my-solution-to-graceful-server-shutdowns-on-power-loss
- NUT
- /www.pontikis.net/blog/apc-ups-master-slave-setup-apcupsd
- Munin | Plugin | NUT
- bernaerts.dyndns.org/linux/75-debian/335-debian-wheezy-install-monitor-eaton-ups
- thomas-leister.de/powerwalker-ups-debian-stretch/
- wiki.debian-fr.xyz/Configurer_et_surveiller_un_onduleur_avec_NUT
- Raspberry Pi - UPS server using NUT
-
-
-
-