wombat.ch

your Partner for Network Design and CMS

Hardware Information

OLED Display Blau I2c 128x64 0.96’’


4 Pin OLED Display (COG+PCB) 0.96", 128x64

Model No. WEA012864D-03

►Type: Graphic
►Structure: COG+PCB
►Size: 0.96"
►128 x 64 Dot Matrix
►Built-in controller SSD1306
►3V/5V Power supply
►1/64 duty
►Interface: I2C
►4 Pin OLED Display
►Display Color: White / Yellow / Blue


DESCRIPTION

WEA012864D-03 version 4 pin OLED display module is a diagonal size 0.96 inch COG OLED display with PCB board on it. This WEA012864D-03 version OLED display is made of 128x64 pixels. WEA012864D-03 module is built in with SSD1306BZ IC, it communicates via I2C interface only, VCC 3V /5V, I/O level 5V to 3V, with conversion circuit, 1/64 duty cycle. The WEA012864D-03 model is having a smaller PCB than WEA012864D-01 version of which outline size is 27.3x27.3x2.37mm with mounting holes on board and 4 metal pins on module.

This 0.96 inch OLED module is suitable for smart control, industrial control, smart home application, medical device, etc. WEA012864D-03 module can be operating at temperatures from -40℃ to +80℃; its storage temperatures range from -40℃ to +85℃.


SPECIFICATIONS

Interface Pin Function

No.SymbolFunction
1 VCC Power supply input: 2.8 – 5.2V
2 GND Ground
3 SCL The serial clock input.
4 SDA The serial data input/output.

Mechanical Data

ItemDimensionUnit
Dot Matrix 128 × 64 Dots
Module dimension 27.30 × 27.30 × 2.37 mm
Active Area 21.74 × 10.86 mm
Pixel Size 0.148 × 0.148 mm
Pixel Pitch 0.17 × 0.17 mm
Display Mode Passive Matrix
Display Color Monochrome
Drive Duty 1/64 Duty
IC SSD1306
Interface I2C
Size 0.96 inch

Absolute Maximum Ratings

ParameterSymbolMinMaxUnit
Supply Voltage for Logic VCC 1.65 5.5 V
Operating Temperature TOP -40 +80 °C
Storage Temperature TSTG -40 +85 °C

Electronical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage for Logic VCC 2.8 3.3 5.2 V
Input High Volt. VIH 0.8×VCC VCC V
Input Low Volt. VIL 0 0.2×VCC V
Output High Volt. VOH 0.9×VCC VCC V
Output Low Volt. VOL 0 0.1×VCC V
50% Check Board operating Current ICC Vcc=3.3V 12.0 20.0 mA

Search keyword: 128x64 oled, oled 128x64, 0.96 oled, 0.96" oled, 0.96 inch oled, oled 0.96, oled 0.96"




Source/Quellen:
https://www.winstar.com.tw/products/oled-module/graphic-oled-display/4-pin-oled.html
-
-
-
-
Add a comment
HiFiBerry DAC+ Pro

Full specs

The HiFiBerry DAC/DAC+ is a high-resolution digital-to-analog converter for the Raspberry Pi. It’s available for every Raspberry Pi Model—just pick the right board that matches the motherboard you want to use.

  • Directly powered from the Raspberry Pi—no additional power supply
  • Ultra-low-noise voltage regulator for optimal audio performance
  • Available with different output connectors: RCA or 3.5mm phone jack (DAC+ Light and Pro only available with RCA jacks)

For HiFiBerry DAC/ DAC+ standard and DAC+ pro:

  • Dedicated 192kHz/24bit high-quality Burr-Brown DAC for best sound quality (ESS instead of Burr-Brown on DAC+ Light)
  • Hardware volume control—you can control the output volume using “alsamixer” or any application that supports ALSA mixer controls (not available on DAC+ Light)

For HiFiBerry DAC+ light/ DAC+ standard and DAC+ pro:

  • Connects directly to the Raspberry Pi—no additional cables needed
  • Comes as a pre-fabricated kit mounted in less than a minute—you just plug it onto the Raspberry Pi B+ (no soldering necessary)
  • Compatible with all Raspberry Pi’s with the 40-pin connector (Raspberry Pi B+/2/3/Zero)
  • Integrated EEPROM for automatic configuration (not DAC+ Light)
  • The board conforms to the Raspberry Pi hardware-attached-on-top (HAT) specification.
  • Comes with all components required to mount it—the spacers are included when you buy the board

DAC+ Pro advanced features:

  • Gold-plated connectors: Gold-plated RCA connectors ensure optimal connection to your RCA cables.
  • Dual-domain clock circuit: The DAC+ Pro uses its own on-board low-jitter clock generator. To have the lowest jitter values, there are 2 different clocks on board: one for 44.1/88.2/176.4 kHz sample rates and another for 48/96/192kHz.
  • Hackable: The board can be modified to allow external power supply for the analog part of the board. Also you can connect external I2S DACs. These features need soldering on the board. This will void warranty, but real hardware hackers have no problems with this.









Quellen/Source:
- hifiberry | dacplus 
-
-
-
-
- Add a comment

Subcategories

Gadget (englisch für Apparat, technische Spielerei oder auch Schnickschnack) bezeichnet ein technisches Werkzeug oder Gerät mit bisher so nicht bekannter Funktionalität und/oder besonderem Design. Es ist traditionellerweise klein und handlich und zum Mitführen konzipiert. Eine große Rolle spielt der Spaßfaktor eines Gadgets: Geräte, die sich als Gadget definieren, sind oft Grenzgänger zwischen sinnvoller Funktionalität und Verspieltheit.Der Duden definiert Gadget als „kleiner, raffinierter technischer Gegenstand“.

Data Center Infrastructure Management

RSS Feed


Warning: Invalid argument supplied for foreach() in /var/www/clients/client2/web2/web/j/modules/mod_jw_srfr/helper.php on line 39

Warning: Invalid argument supplied for foreach() in /var/www/clients/client2/web2/web/j/modules/mod_jw_srfr/helper.php on line 39

neusten Links


Warning: count(): Parameter must be an array or an object that implements Countable in /var/www/clients/client2/web2/web/j/modules/mod_quicklistweblinks/helper.php on line 78
many More Links »

part of ...

Linux Counter

Disqus

 

Learning Network

Seti@home & Boinc

myBonic

statistik

 


Who is Online

We have 312 guests and no members online

We have 312 guests, no bots and no members online