Software Information

You are here: Home

network

Network Basics

Literatur

Arduino

Programming Your Home

Software Information

Munin-Plugin | Apt & apt_all

Created: 25 October 2019 | Written by vincent | Print | Email | Hits: 3915

Add also to

vi /etc/cron.d/munin-plugin-apt
03 * * * *    root    apt update > /dev/null 2>&1
18 * * * *    root    apt-get update > /dev/null 2>&1
33 * * * *    root    apt upgrade > /dev/null 2>&1
48 * * * *    root    apt-get upgrade > /dev/null 2>&1

# service cron reload

==============================================================
Problems:
:/etc/munin/plugins# munin-run apt
pending.value 3
pending.extinfo file libmagic-mgc libmagic1
hold.value 0
---
:/etc/munin/plugins# munin-run apt_all
pending_stable.value 0
hold_stable.value 0
pending_testing.value 0
hold_testing.value 0
pending_unstable.value 0
hold_unstable.value 0

Add a comment

Category: Munin

Munin | Group Information

Created: 17 October 2019 | Written by vincent | Print | Email | Hits: 4338

Munin | Group Information

How to use and where to define Groups, and the difference in using the Munin-Master <--> Munin-Node vs. Munin-Master with SNMP

Munin-Master <--> Munin-Node

in the Munin-Master device in the file

# /etc/munin/munin.conf

you have information like this to add for each Munin-Node

[munin-node.yourDomani.org]
address 10.10.10.10
use_node_name yes

With this ([munin-node.yourDomani.org]) part you are able to define some structure for your device.
The first part, bevor the dot, is your device you wish to monitore, behinde the dot you build your structure.

If you wish to Group it and split your VM, Switch, Hardware, Infrastructure device you could create a structure like this

[server1.HW]
[Munin.VM]
[debian9.VM-Test]

Munin-Master <--> SNMP-"Node"

in the Munin-Master device in the file

# /etc/munin/munin.conf

you have information like this to add for each

[munin-node.yourDomani.org]
address 10.10.10.10
use_node_name yes

Add a comment

Category: Munin

Munin-SNMP Plugin | Gude

Created: 11 October 2019 | Written by vincent | Print | Email | Hits: 4141

Munin-SNMP Plugin | Gude

epc8220

Category: Munin

Munin-Node | SNMP - Cisco Switch 3560

Created: 28 September 2019 | Written by vincent | Print | Email | Hits: 6179

Munin-Node | SNMP - Cisco Switch 3560

Config Cisco Switch

The IP Adresse has to be changed to your Munin-server (down is just a example), the Password change to something better! Configure and securing SNMP only Munin has access on a Cisco 3560er	Login > enable # conf term (config)# snmp-server community passwort ro 98 (config)# access-list 98 permit host 10.147.42.63 (config)# snmp-server host 10.147.42.63 password2 (config)# exit #wr
Check SNMP	# show snmp # show snmp view # show snmp group # show snmp user

Config Munin-Server

# vi /etc/hosts	10.18.14.21 swt-02.Infra.kozo.ch swt-02
# cd /etc/munin/plugin-conf.d/ # vi snmp_communities	[snmp_swt-02.Infra.kozo.ch_*] env.community public

# munin-node-configure --snmp swt-02.Infra.kozo.ch -shell \| sh -x


# cd /usr/share/munin/plugins/

# ln -s /usr/share/munin/plugins/snmp__uptime /etc/munin/plugins/snmp_swt-02.Infra.kozo.ch_uptime and more to come

# /etc/init.d/munin-node restart

# vi /etc/munin/munin.conf	[swt-02.HV.kozo.ch] address 127.0.0.1 use_node_name no
# /etc/init.d/munin-node restart

- - -

Quellen/Source:
. Munin überwacht SNMP-fähige Geräte
- Generating Munin graphs for WRT54GL running DD-WRT via SNMP
- (2019) my Request on Github -because it can't be added to a group
-
- Add a comment

Category: Munin

Munin-Node | opnSense

Created: 27 September 2019 | Written by vincent | Print | Email | Hits: 4540

Munin-Node | opnSense


all Plugins	# cd /usr/local/share/munin/plugins
active Plugins	# cd /usr/local/etc/munin/plugins

	# ln -s /usr/local/share/munin/plugins/dhcpd3 /usr/local/etc/munin/plugins/dhcpd3

	# /usr/local/etc/rc.d/munin-node restart



Plugins
dhcp3	defined on the file	location on FreeBSD/opnSense
	env.leasefile /var/lib/dhcp3/dhcpd.leases env.configfile /etc/dhcp3/dhcpd.conf	/var/dhcpd/var/db/dhcpd.leases /var/dhcpd/etc/dhcpd.conf